Before & After Photos

This project was a roof repair in Longs, South Carolina. We removed all of the existing roofing and replaced all of the damaged and rotted wood. We also installed ice and water shields on all drip edges, step flashings, valleys and penetrations on the roof. Other things we installed on this roof include synthetic felt, aluminum drip metal, aluminum rake metal, and new flashings. We finished the project by installing new lifetime shingles, ridge vents, and ridge caps. 

For this project, the roof needed repairs around the chimney. To do this we repaired and replaced the sheeting around the chimney, as well as re-flashed and sealed any visible water intrusion areas. 

This single-family was due for a roof replacement, this was the original roof when the home was built. We started this job by tearing away the existing roofing materials and disposing of them properly. We bring in our own dumpster and ask the homeowner where they would like the dumpster located. To ensure protection from the weather a Water Barrier as well as a layer of Synthetic Underlayment. For shingles, we installed a Klaus Roofing System that included Shingles in the Charcoal Grey. And, to finish the job we replaced the vent pipe boot and chimney flashing.

This project in Myrtle Beach, SC needed a full roof replacement. To start this project we began by removing all of the existing roof, and replacing any rotted or damaged wood underneath. We installed a ice and water shield to all drip edges, step flashings, valleys, and peaks. Other installations done to this roof include synthetic felt, aluminum drop metal, aluminum rake metal, and new flashings. We finished this project by installing new lifetime shingles, ridge vents and ridge caps. 

For this project in Myrtle Beach, SC we began with removing the existing roofing, and replaced all of the damaged or rotting wood underneath. An Ice and Water Shield is installed to all step flashings, valleys, penetrations, and drip edges. Other installations on this project include synthetic felt on balance of wood, new aluminum drip metal and rake metal, as well as a new chimney flashing. To finish this project we installed new Cambridge shingles as well as ridge vents, and ridge caps.